Brainboxes CC-310 Instrukcja Obsługi Strona 51

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 62
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 50
PCI VELOCITY / OPTO ISO RS422/485 RS422/485 Information
Chapter 4 Page 41
Fail Safe Open Circuit Detection.
Open circuit is when there are no drivers on the circuit. This
occurs by design in party line multi driver/receiver systems and
unintentionally when the twisted pair line is accidentally cut or
disconnected or the transmitting device fails. In RS485 party line
systems there are extended periods of time when none of the many
possible talkers are gated onto the bus. This is known as the line
idle state and occurs when all the driver outputs are in the high
impedance state. The lines float, perhaps being pulled to the high or
low state by noise or other voltages on the line.
Without fail safe open circuit detection false start bits are
detected by the receivers, either corrupting good communications
or causing noise to masquerade as good data.
The on board fail safe open circuit detection causes the
receiver to go to a known, pre-determined state and prevents false
start bits and bad data being detected during open circuits.
Fail Safe Short Circuit Protection.
Short circuits are when the two lines of a twisted pair are
connected together. This occurs due to either accidental damage to
the cable or due to failure of one or more transmitter/receivers on
the line. The short circuit condition is dangerous since damage to
the receiver may occur and communication may be corrupted or
prevented.
The on board fail safe short circuit detection prevents the line
impedance from going to zero and thus protects the inputs of
receivers and the outputs of drivers.
RS422 Operation.
Generally, in RS422 systems all 8 signal lines from the 9
pin D connector participate in the data transfer sequence, thus 4
twisted pair cables are used. One twisted pair carries the TXD data
outwards, one pair brings the RXD data inward, another pair carries
the RTS handshake outwards and the fourth pair brings the CTS
handshake inwards. There is no need to carry the ground from one
device to another.
Przeglądanie stron 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 61 62

Komentarze do niniejszej Instrukcji

Brak uwag

Belkin F9K1118 manuály

Uživatelské manuály a uživatelské příručky pro Směrovače Belkin F9K1118.
Poskytujeme 1 manuály pdf Belkin F9K1118 ke stažení zdarma podle typů dokumentů: Uživatelský manuál






Další produkty a příručky pro Směrovače Belkin

Modely Typ Dokumentu
N600 Uživatelský manuál   Belkin Play N600, 48 stránky
AC750 DB Uživatelský manuál   Belkin Play N750 DSL Wi-Fi Ethernet LAN Black, 47 stránky
N150 Uživatelský manuál   Belkin N150, 41 stránky
N300 Uživatelský manuál   Belkin N300, 50 stránky
SURF N 15 N150 Uživatelský manuál   Belkin SURF N150, 41 stránky
N300 Uživatelský manuál   Belkin SURF N300, 30 stránky
F7D4302UK Uživatelský manuál   Belkin F7D4302UK router, 39 stránky
N150 Uživatelský manuál   Belkin SURF N150, 41 stránky
F7D4401UK Uživatelský manuál   Belkin F7D4401UK router, 38 stránky
F7D3402UK Uživatelský manuál   Belkin F7D3402UK router, 36 stránky
N300 Uživatelský manuál   Belkin N300, 37 stránky
F5D4073 Uživatelský manuál   Kabelloser Enhanced Modem-Router [en] , 102 stránky
F5D6231 V2 Uživatelská příručka   Belkin F5D6231 V2 User guide, 49 stránky
PM01116ea F5D9231-4 Uživatelský manuál   Router inalámbrico, 101 stránky
F6D6050ea Uživatelský manuál    Belkin F6D6050ea User manual, 55 stránky
F5D7230TT4-SN Uživatelský manuál   P74559spA_F5D7230_man, 120 stránky
F5D7230DF4 Uživatelský manuál      Wireless G Router, 8 stránky
F6D4050 Uživatelský manuál    Belkin F6D4050 User manual, 43 stránky
F5D8013 Uživatelský manuál   Belkin F5D8013 User manual, 44 stránky
F6D4230-4 Uživatelský manuál   8820-00034es-f6d4230-manual, 100 stránky